描述
HOTLINE:0086-13411521928
描述
描述
New Energy Industry
描述
High frequency transformer
描述
Inverter
描述
Wireless charging Coil
1. TRANSMO Litz Wire
Litz wire is made of several strands of enameled copper wire that are twisted together. Litz wire is used to reduce the losses caused by the skin-effect in high frequency applications. Company with single wire in same cross section, the usage of Litz wire can reduce resistance and increase inductance, and increase the effectiveness and produce less heat. Meanwhile, Litz wire has much better mechanical flexibility. Widely used in high frequency transformers and high frequency coils.
A. Features Of TRANSMO Litz Wire

Ø  For high frequency application, Litz wire can reduce skin-effect, increase current density, reduce heat producing,

Ø  The diameter of strand may be selected depend on the frequency of application.

Ø  The Lite wire is more flexible and better anti-bending performance compare with solid wire.

B. Identification Of Litz Wire
描述
① The code of Litz wire.
② Insulation thickness:
    For JIS C3202: 0=Class 0, 1=Class 1, 2=Class 2, 3=Class 3. 
    For IEC 60317: 0=Grade 3, 1=Grade 2, 2=Grade 1, 3=Grade 0.
    For NEMA MW1000: 0=Triple, 1=Heavy, 2=Single.
③ Type of Enamel: UE=Polyurethane, SEI=Solderable polyesterimide,
    EI/AI=Polyesterimide(base coat)+Polyamideimide(top coat),  AI=Polyamideimide.
④ Means Wire.
⑤ Thermal class: 155, 180, 200, 220.
⑥ Nominal/conductor diameter in mm. 
⑦ Number of strand.

2. TRANSMO Extruded Litz Wire
Extruded Litz Wire is a magnet wire formed by Litz wire with one more layers of extruded jacket.
三、产品范围
描述
描述
描述
四、自粘线粘合及再软化曲线图
描述
A. Features Of TRANSMO Extruded Litz Wire

Ø  Good high frequency performance

Ø  High insulation strength

Ø  Good processability

Ø  Fire and flame resistance.

Ø  Good consistency and concentricity of the insulating layer

Ø  Many extrusion materials are available

Ø  Special wires can be customized

B. TRANSMO Properties Of Extruded Insulation Material
描述
C. TRANSMO Product Range
Thickness of each layer:0.025-1.5mm 
No. of strands:From 2 up to 36000 
Diameter of strand:From 0.020mm up to 0.60mm 
Type of strand:UEW,SEIW,EI/AIW, AIW。
Overall diameter:0.2-10mm 
Cross section area:< 50mm²
3. TRANSMO Served Litz Wire
This is a group of wire served with fiber or silk. The material is including Dacron fiber, Nylon fiber, natural silk, bondable fiber (by Acetone or by heating).
A. Identifications Of Served Litz Wire
描述
① Product code: 
    USTC: Litz wire served with single layer of fiber.
    UDTC: Litz wire served with double layers of fiber.
    UDATC: Litz wire served with base fiber and bondable layer(By Acetone).
    UDHTC: Litz wire served with base fiber and bondable layer(By heating).
② Insulation thickness:
    For JIS C3202: 0=Class 0, 1=Class 1, 2=Class 2, 3=Class 2.
    For IEC 60317: 0=Grade 3, 1=Grade 2, 2=Grade 1, 3=Grade 1.
    For NEMA MW1000: 0=Triple, 1=Heavy, 1=Single.
③ Type of Enamel: UE=Polyurethane, SEI=Solderable polyesterimide,
    EI/AI=Polyesterimide(base coat)+Polyamideimide(top coat), AI=Polyamideimide.
④ Means Wire.
⑤ Thermal class: 155, 180, 200, 219.
⑥ Nominal/conductor diameter of solid strand in mm. 
⑦ Number of strand.
B. Features Of TRANSMO Litz Wire

Ø  Served Litz wire has all the features of Litz wire

Ø  During winding process, the layout of wire is smooth and in good order. Q value is high. Provide higher power for transformer.

Ø  With the protection of served layer, the wire has better electrical strength after process.

Ø  Improve the effect of lacquer process.

Ø  The self-bonding type may form the coil, it may reduce the structure and the process of component.

C. TRANSMO Product Range
No. of strands:From 2 up to 36000 
Diameter of strand:From 0.020mm up to 0.60mm 
Type of strand:UEW,SEIW,
EI/AIW, AIW。 
Overall diameter:0.2-10mm 
Cross section area:< 50mm²
4. TRANSMO Taped Litz Wire
This is a wire or Litz wire wrapped with a Mylar or other tapes made from different material and at certain overlapping rate.
A. Identification Of Lizt Wire
描述
① The code of Taped Litz wire.
② Material of tape: T=PET, I= PI, N=PEN.
③ Insulation thickness:
    For JIS C3202: 0=Class 0, 1=Class 1, 2=Class 2, 3=Class 3. 
    For IEC 60317: 0=Grade 3, 1=Grade 2, 2=Grade 1, 3=Grade 0.
    For NEMA MW1000: 0=Triple, 1=Heavy, 2=Single.
④ Type of Enamel: UE=Polyurethane, SEI=Solderable polyesterimide, 
    EI/AI=Polyesterimide(base coat)+Polyamideimide(top coat), AI=Polyamideimide.
⑤ Means Wire.
⑥ Thermal class: 155, 180, 200, 220.
⑦ Nominal/conductor diameter of solid strand in mm.
⑧ Number of strand. 
B. Features Of Taped Litz Wire

Ø  Taped Litz wire has all the features of Litz wire.

Ø  High insulation strength

Ø  High thermal performance

Ø  High resistance to radiation(PI tape)

 

C. TRANSMO Product Range
Overlapping:50%. 67%, 75% 
No. of stands:2-36000  
Diameter of strand:0.020-0.60mm 
Type of strand:UEW,SEIW,EI/AIW, AIW。 
Overall diameter:0.2-10mm
Cross section area:< 50mm²
5. TRANSMO Spool Type/Size
描述
描述
描述
6. TRANSMO Packing